About Us

Introduction

Globalisation has created uniformity in customer expectations world over. With opening up of Indian economy, our manufacturing sector has to compete globally even for the domestic market. This would require strong products with leading technology / quality and compelling cost advantage. Suitably trained manpower with skill sets appropriate for design, development and prototyping using modern IT tools is critical to achieve this goal. This Institute is envisioned as an academic institution of excellence that would facilitate and promote the competitive advantage of Indian products in global markets. This Institute will serve as an inter-disciplinary institution for education and research in the area of Product Lifecycle Management (PLM) encompassing design and manufacturing using state of the art concepts, tools, processes and practices of the industry world over.
Indian Institute of Information Technology Design and Manufacturing Kancheepuram (IIITDM Kancheepuram) is a Centre of Excellence for technical education and research established in 2007 by the Ministry of Education, Government of India to pursue design and manufacturing oriented engineering education and research and to promote the competitive advantage of Indian products in global markets.
It is one of the two IIITDMs, the other one being located in Jabalpur. The institute, which was operating from its temporary campus within the Indian Institute of Technology Madras, which was also its mentor institute, has moved to its permanent campus at Kelambakkam-Vandalur road near Chennai in 2011. The institute offers academic and research programs that integrate engineering design, manufacturing and management with information technology. The institute offers undergraduate and postgraduate programs which focus on IT, design and manufacturing in engineering sectors.
The institute is located on a 51 acre campus on the outskirts of Chennai, off the Vandalur-Kelambakkam road. It is a fully residential campus with all students residing within the campus. The campus houses the academic block, the administrative block, lecture hall complex and laboratory block.
The Institute is presently offering B.Tech programmes in Computer Engineering, Electronics and Communication Engineering (Design & Manufacturing) and Mechanical Engineering (Design & Manufacturing), 5 Dual Degree Programmes leading to B.Tech and M.Tech Degrees, M.Des in Electronic Systems Design, Communication Systems Design, Mechanical Systems Design and inter-disciplinary Ph.D programmes in core and applied areas of engineering. From the academic year 2016, the Institute will introduce the B.Tech Mechanical (Smart Manufacturing). The faculty members of the Institute are also involved in sponsored and consultancy research projects from reputed industries and government organisations.
The curricula for all the programs have been framed after extensive deliberations and discussions with IITs, IISc and other reputed Institute faculty members and industry stake holders. The programmes are aimed at providing solutions to current technological challenges in wide domains like robotics, home entertainment, telecommunication automotive systems, etc. Design engineers and researchers passing out from IIITDM Kancheepuram will find scope and relevance in IT and IT enabled product companies, in particular analog and digital electronics IC companies, embedded systems players, automotive design, consumer product design and manufacturing and knowledge/service based industries. With mastery in domain specific design, engineering skills and required managerial expertise, our graduates can entrepreneur organisations involved in the design and manufacture of commercially successful electronic or mechanical products.

Vision, Mission & Charter

Highlights

IIITDM Kancheepuram, or the Indian Institute of Information Technology Design and Manufacturing, is in Chennai. It was established in 2007 by MHRD, the Government of India. IIITDMK BTech admission will be based on JEE Main 2023 examination. The JEE Main application process is complete, and JEE Main 2023 Results for session two will be announced very soon. JEE Main Cutoff 2023 is the deciding factor. JoSAA 2023 registrations will commence on June 19, 2023.

IIITDM Kancheepuram Latest Updates

• April 29, 2023: JEE Main Session 2 result is declared. Check here.

The Indian Institute of Information Technology Design and Manufacturing Kancheepuram ranked 184 among Engineering colleges in NIRF Rankings 2022. IIITDMK offers UG, PG and Doctorate courses in Engineering. IIITDM Chennai offers ample academic and administrative functions on a lush green campus across 51.75 acres. The institute provides excellent placements as well. In 2022 the average salary package offered was INR 12 LPA. 

Indian Institute of Information Technology Design and Manufacturing Kancheepuram provides a better environment with all the essential facilities for their students to grow and learn. The highlights of IIITDM Kancheepuram are mentioned below.

Year of Establishment	2007
Type of Institute	Public
Accreditations	AICTE
Approvals	All India Council for Technical Education [AICTE]
Campus Area	51.75 acres
Courses Offered	Undergraduate, Postgraduate, Doctoral
Facilities Offered	Library Facility, Hall of Residence, Dining, and Shopping, Medical Aid Centre, ATM Facility
Location	Kancheepuram, Tamil Nadu

Courses & Fees

Courses	Total tuition Fees	Eligibility
B.E. / B.Tech(10 Courses)	INR 5.28 L (for 4-5 years)	10+2 : 75 % Exams :JEE MainDASA UG
M.E./M.Tech(11 Courses)	INR 2.2 L (for 2-5 years)	10+2 : 75 % Graduation : 60 % Exams :GATECCMT+1 more
M.Des(4 Courses)	INR 1.1 L (for 2 years)	Graduation : 60 % Exams :GATECEED

Admission Procedure

IIITDM Kancheepuram admission 2023 for B.Tech is based on JEE Main scores. The JEE Main 2023 Phase 2 exam was concluded on April 15, 2023. The Provisional answer key for JEE Main Session 2 was released on April 24, 2023. The JEE Main Phase 2 exam results were released on April 29, 2023. Counselling for JEE Main registrations is expected to commence on June 19, 2023 (Tentative).

IIITDM Kancheepuram Latest Updates

• April 29, 2023: JEE Main Session 2 result is declared. Check here.

IIITDM Kancheepuram offers 1 UG, 1 PG and 1 Research programme. The IIITDM Kancheepuram course admission is based on criteria like - academics, entrance rank, cutoff, counselling and interview performance. The IIITDM Kancheepuram application form is available on the institute’s official website. 

Applicants must obtain a valid JEE Main, GATE, or NET score to participate in the IIITDM Kancheepuram admission 2023. For PhD, students must attend the IIITDM Kancheepuram entrance exams held at the institute. More information on the IIITDM Kancheepuram admission process, including the eligibility criteria, selection process, fee, and IIITDMK admission dates, is given below.

Admission: Important Dates 2023

The important events relating to the Indian Institute of Information Technology Design and Manufacturing Kancheepuram admission process are below. Note that some of the dates are tentative.

Event	Dates
JEE Main Application Opens	February 15, 2023
JEE Main Application Closes	March 12, 2023
JEE Main 2023 Phase 2 Exam	April 06 - April 15, 2023
JEE Main Session 2 Provisional Answer Key	April 24, 2023
JEE Main Session 2 Result	April 29, 2023
GATE CCMT Counselling 2023 Starts	June 16, 2023 (Tentative)
JEE Main Counselling Starts	June 19, 2023 (Tentative)

UG Admission 2023

IIITDM Kancheepuram UG admission is open to 1 UG course - B.Tech. The course duration is four years. Below is more information on the IIITDM Kancheepuram eligibility criteria, selection process and total average fee details of the IIITDM Kancheepuram admission 2023.

Courses	Eligibility & Selection	Total Avg. Fee
B.Tech	Eligibility: Class 10+2 in the science stream with 75% marks  Selection Process: JEE Main + Counselling + Interview	INR 4,32,000

PG Admission 2023

IIITDM Kancheepuram PG admission is open to 1 PG course - M.Tech. The course duration is two years. Several specialities are offered for the M.Tech course in the IIITDMK admission. To secure a seat, students must meet all the IIITDM Kancheepuram admission criteria for the M.Tech course.

More information on the IIITDM Kancheepuram eligibility criteria, selection process and total average fee details of the IIITDM Kancheepuram admission 2023.

Courses	Eligibility & Selection	Total Avg. Fee
M.Tech	Eligibility: BE/B.Tech in a relevant subject with 60% aggregate marks Selection Process: GATE + Counselling + Interview	INR 1,00,000

PhD Admission 2023 

IIITDM Kancheepuram admission 2023 is available for 1 Research-level programme - PhD. IIITDM Chennai offers various PhD specialisations to choose from. The duration of the PhD programme is three years. The IIITDM Kancheepuram admission 2023 for PhD is based on the NET scores. IIITDM Kancheepuram entrance exams are also conducted at the institute for PhD admission.

Check the IIITDM Kancheepuram eligibility criteria, selection process and fee details to participate in the IIITDM Chennai admission process.

Courses	Eligibility & Selection	Total Avg. Fee
PhD	Eligibility: Master's degree in a relevant stream and 50% marks  Selection Process: NET/ IIITDMK Entrance Exam + Interview	INR 1,00,000

Application Process 2023

The IIITDM Kancheepuram admission 2023 is based on merit and entrance exam scores. The accepted IIITDM Kancheepuram entrance exams include - JEE Main/ GATE/ NET. For any IIITDM Kancheepuram course admission, visit the official website and fill out the IIITDM Kancheepuram application form without errors.

Once students are informed about selection, deposit the course fee per the IIITDM Kancheepuram admission 2023 guidelines. This is important to block your seat at the IIITDM Chennai admission. Detailed information about the fee structure is available on the IIITDM Kancheepuram Courses and Fee page.

Steps to Apply for IIITDM Kancheepuram Admission 2023

A quick roadmap of the IIITDM Kancheepuram admission 2023 process is elaborated below. Applicants must meet all the IIITDM Kancheepuram admission criteria to avoid application rejections.

• Step 1: The candidates can visit the official portal of IIITDM Kancheepuram.
• Step 2: Register on the website.
• Step 2: Click the "Apply Online" tab under the quick links section.
• Step 3: Read the IIITDM Kancheepuram admission 2023 guidelines carefully and click on the Proceed tab.
• Step 4: The candidate must complete all the details and attach the required documents.
• Step 5: The students can pay the IITDM Kancheepuram application form fee via Internet banking or credit/ debit card.
• Step 6: Submit the IITDM Kancheepuram application form and take a printout for future purposes.

Cut-Offs

IIITDM Kancheepuram JEE Main cutoff 2023 will be released soon as the JEE Main results 2023 have been declared. The expected JEE Main B.Tech cutoff ranges from 2900 to 41000th rank for the General category and ranges from 1800 to 40000th rank for the OBC category. The JEE Main counseling will be conducted by Joint Seat Allocation Authority (JoSAA). JoSAA 2023 registration will commence on June 19, 2023.

IIITDM Kancheepuram Latest Updates

• April 29, 2023: JEE Main Session 2 result is declared. Check here.

IIITDM Kancheepuram offers undergraduate and postgraduate programs which focus on IT, design, and manufacturing in engineering sectors. The accepted entrance exams are JEE Main, GATE, etc. Students must meet the cutoff criteria and secure good marks in the entrance exams to seek IIITDM Kancheepuram admission.

Applicants willing to apply for the B.Tech program must have a valid JEE Main score and register for JoSAA/ JEE Main counseling. IIITDM Kancheepuram cutoff details of B.Tech and B.Arch based on JEE Main and M.Tech based on GATE.

Cutoff 2023 (Expected)

Students are still awaiting official declarations for the IIITDM Kancheepuram cutoff 2023, to be released by IIITDM Kancheepuram. As per the trends, the expected IIITDM Kancheepuram cutoff for 2023 is given below.

B.Tech JEE Main Cutoff 2023 (Expected)

IIITDM Kancheepuram B.Tech cutoff will be based on JEE Main 2023. The general category students may require a minimum IIITDM Kancheepuram cutoff of 2900 to 41000th rank for different B.Tech specializations. OBC students can expect a cutoff of 1800 to 40000th rank. Likewise, for SC it is 250 to 81000th rank and for ST it is 180 to 129000th rank.

Below is the expected IIITDM Kancheepuram cutoff 2023 for B.Tech based on the JEE Main entrance exam for different category students.

Category	Opening Rank	Closing Rank
General	2110-22000	2900-41000
OBC	270-8100	1800-40000
SC	150-4100	250-81000
ST	130-1200	180-129000
PWD	50-2200	110-254000

M.Tech GATE Cutoff 2023 (Expected)

Indian Institute of Information Technology Design and Manufacturing Kancheepuram cutoff for GATE 2023 has not yet been released. The expected IIITD Kanchipuram cutoff has been listed below for various categories based on the previous year trend. A minimum IIITDM Kancheepuram cutoff of 420 to 450 marks may be required for the general category students.

Category	Cutoff Score
General	420-450
OBC	380-410
SC	250-280
EWS	350-380

Cutoff 2022

The IIITDM Kancheepuram cutoff 2022 for different courses and categories is given below.

B.Tech JEE Main Cutoff 2022

The following table displays the IIITDM Kancheepuram JEE Main B.Tech cutoff 2022 for the B.Tech program based on JEE Main 2022 for various category students. A minimum IIITDM Kancheepuram JEE Main cutoff 2022 of 19453rd rank was required for B.Tech in Computer Science and Artificial Intelligence Engineering for general category students.

General Category

B.Tech Specializations	Opening Rank	Closing Rank
Computer Science and Artificial Intelligence	14806	19453
Electronics & Communication Engineering	23056	28863
Mechanical Engineering	36854	51087
Mechanical- Smart Manufacturing	38138	59743

OBC Category

B.Tech Specializations	Opening Rank	Closing Rank
Computer Science and Artificial Intelligence	5613	24440
Electronics & Communication Engineering	8403	38114
Mechanical Engineering	12627	70331
Mechanical- Smart Manufacturing	13251	72894

SC Category

B.Tech Specializations	Opening Rank	Closing Rank
Computer Science and Artificial Intelligence	3134	23012
Electronics & Communication Engineering	4570	39597
Mechanical Engineering	5941	72129
Mechanical- Smart Manufacturing	6622	79457

ST Category

B.Tech Specializations	Opening Rank	Closing Rank
Computer Science and Artificial Intelligence	1318	1318
Electronics & Communication Engineering	1798	125510
Mechanical Engineering	2973	240679
Mechanical- Smart Manufacturing	3259	264159

PWD Category

B.Tech Specializations	Opening Rank	Closing Rank
Computer Science and Artificial Intelligence	578	578
Electronics & Communication Engineering	1101	1117
Mechanical Engineering	1436	-

EWS Category

B.Tech Specializations	Opening Rank	Closing Rank
Computer Science and Artificial Intelligence	2551	23012
Electronics & Communication Engineering	3873	39597
Mechanical Engineering	5941	72129
Mechanical- Smart Manufacturing	6622	79457

M.Tech GATE Cutoff 2022

Displayed below is the IIITDM Kancheepuram cutoff 2022 for the M.Tech program based on GATE for the academic year 2022 for various category students. A minimum IIITDM Kancheepuram cutoff of 387 marks was required for M.Tech in Communication Systems for general category students. Below table is the IIITDMK cutoff GATE for M.Tech Program for general category. 

Specialisation	Cutoff Score
Communication Systems	387
Smart Manufacturing	398
Mechanical System Design	431
Microelectronics and VLSI Design	450
Artificial Intelligence & Data Science	451

Cutoff 2021

The IIITDM Chennai cutoff data for different courses and categories based on different exams for the year 2021 is given below

B.Tech JEE Main Cutoff 2021

Tabulated below is the IIITDM Kancheepuram JEE Main cutoff 2021 for the B.Tech program based on JEE Main for the academic year 2021 for various category students. A minimum IIITDM Kancheepuram cutoff of 39524th rank was required for general category students for admission to B.Tech in Mechanical Engineering.

General Category

Specialisation	Opening Rank	Closing Rank
Mechanical Engineering	33574	39524
Electronics and Communication Engineering	23457	26675
Computer Science and Engineering (AI)	15687	16721
Computer Science and Engineering	15410	17414
Smart Manufacturing	37550	43973

OBC Category

Specialisation	Opening Rank	Closing Rank
Computer Science and Artificial Intelligence	6152	7069
Electronics & Communication Engineering	8851	9954
Mechanical Engineering	12037	14449
Mechanical- Smart Manufacturing	12973	16292
Artificial Intelligence	6152	-

SC Category

Specialisation	Opening Rank	Closing Rank
Mechanical Engineering	6807	6793
Electronics and Communication Engineering	5626	6499
Computer Science and Engineering (AI)	3776	4256
Computer Science and Engineering	3653	4093
Smart Manufacturing	7678	9986

ST Category

Specialisation	Opening Rank	Closing Rank
Mechanical Engineering	2945	3208
Electronics and Communication Engineering	2383	3067
Computer Science and Engineering (AI)	1421	1705
Computer Science and Engineering	1752	2162
Smart Manufacturing	3392	3867

M.Tech GATE Cutoff 2021

Tabulated below is the cutoff 2021 of the M.Tech course offered by IIITDM Kancheepuram based on GATE for the different category students. A general category student must have a minimum of 542 marks for admission to M.Tech in Computer Science and Engineering (Data Science and AI).

General Category

Specialisations		Cutoff Score
Computer Science and Engineering (Data Science and AI)		542
Electronics and Communication Engineering (Microelectronics and VLSI Systems)		474
Mechanical Engineering (Smart Manufacturing)		460
Mechanical Engineering (Mechanical Systems Design)		495
Electronics and Communication Engineering (Communication System)		421

OBC Category

Specialisations		Cutoff Score
Computer Science and Engineering (Data Science and AI)		375
Electronics and Communication Engineering (Microelectronics and VLSI Systems)		417
Mechanical Engineering (Smart Manufacturing)		369
Mechanical Engineering (Mechanical Systems Design)		409
Electronics and Communication Engineering (Communication System)		379

SC Category

Specialisations		Cutoff Score
Computer Science and Engineering (Data Science and AI)		300
Electronics and Communication Engineering (Microelectronics and VLSI Systems)		255
Mechanical Engineering (Smart Manufacturing)		237
Mechanical Engineering (Mechanical Systems Design)		233
Electronics and Communication Engineering (Communication System)		255

ST Category

Specialisations		Cutoff Score
Mechanical System Design		327

EWS Category

Specialisations		Cutoff Score
Computer Science and Engineering (Data Science and AI)		392
Electronics and Communication Engineering (Microelectronics and VLSI Systems)		402
Mechanical Engineering (Smart Manufacturing)		320
Mechanical Engineering (Mechanical Systems Design)		366
Electronics and Communication Engineering (Communication System)		345

Placements

IIITDM Kancheepuram placements 2021 witnessed placement success of 74%. From 273 students, 246 students took part in the placement process. During the 2021 placement drive, 67 companies participated, who extended 183 offers to students. The highest ever package offered to the students is INR 51 LPA. The placements are conducted across undergraduate and postgraduate programs.

Placement Highlights

The IIIT Kancheepuram highest package for the year 2019 for PG and UG stream stood at INR 20 LPA and INR 10.5 LPA, respectively. Amazon offered the highest pay for UG, and in PG, it was offered by PayPal. The median package for B.Tech, Dual Degree, and M.Tech was INR 6.5 LPA, INR 7.5 LPA, and 6.8 LPA, respectively. The key highlights of the IIITDM Kancheepuram placements 2021 are mentioned below.

Program	Students Registered	Students Placed	Median Package (in INR)
B.Tech	109	105	6.5 LPA
Dual Degree	82	51	7.5 LPA
M.Tech	45	18	6.8 LPA

Placement Cell

The placement cell is solely responsible for all the placement activities of the institute. The cell consists of student representatives and faculty coordinators. The placement process of IIITDM Kancheepuram, is as follows:-

• Sending formal invite along with Employer Registration Form.
• Replying to recruiters based on their response to the formal invite.
• With mutual discussion, the dates for the preplacement talk and campus interviews are scheduled.
• Interested candidates register themselves.
• The candidates are shortlisted by T&P Cell based on the requirement of the recruiter.
• The interviews and other rounds are conducted for the shortlisted candidates.
• The selected candidates' list is to be issued by the recruiter on the same day of the selection process.

Top Recruiters

Mentioned below are the top recruiters participating in the Indian Institute of Information Technology Design & Manufacturing placement drive.

Brakes India	Amazon	Forbes Marshall
Coviam	Paypal	Startssmarts Labs
Cyber Security	Buddi Health	TVS Motors
IBM	Mathworks	Wipro
One Plus	Codenation	TCS
L&T	Lucid	Zoho

Placement Statistics

The student's placement percentage saw a gradual increase from the year 2017. The marginal increase in the last two years has been good. The students placed from 2017 to 2020 are stated below.

Year	Students Placed
2020	200
2019	182
2018	152
2017	68

Undergraduate Placement Statistics

The table beneath displays the data of students placed across various branches in 2019 during IIITDM Kancheepuram placements.

Branches	Students Placed
COE	33
EDM	34
MDM	32
CSE	19
ECE	17

Postgraduate Placement Statistics

The below table depicts the data of PG students placed across various branches in 2019.

Branches	Students Placed
CDS	8
EDS	10
MDS	15
CED	35
ESD	14
EVD	18
MFD	13
MPD	15
SMT	9

Average Package 2022

The table below mentions the course-wise IIIT Kancheepuram average package offered during 2022 placements:

IIIT Kancheepuram Placements 2022
Course	Average Package
BTech	INR 10.2 LPA
Dual Degree	INR 12 LPA
MTech	INR 8.69 LPA

The institute has also released the branch-wise average packages offered during 2022 placements. CSE emerged as the top branch with the highest average package of INR 13.20 LPA. Refer to the below table for branch-wise salary details of IIIT Kancheepuram placements 2022:

IIIT Kancheepuram Placements 2022
Branch	Average Package
CSE	INR 13.20 LPA
ECE	INR 11.37 LPA
Mechanical Engineering	INR 7.95 LPA
Mechanical Smart Manufacturing	INR 10.17 LPA

Highest Package 2022

The 2022 IIIT Kancheepuram highest package details are not released as of now. However, the institute has released the median package statistics for 2021 placements which are as follows:

IIIT Kancheepuram Placements 2021
Course	Median Package
BTech	INR 6.5 LPA
Dual Degree	INR 7.5 LPA
MTech/ MDes	INR 6.8 LPA

Batch Placed 2022

During 2022 placements, 97.55% of offers were received, out of which the majority of offers were made to BTech students. The complete insights related to IIIT Kancheepuram placements 2022 are tabulated below:

IIIT Kancheepuram Placements 2022
Particulars	Statistics
Placement rate	97%
Students registered	286
Offers received	279
Percentage of offers received	97.55%

Along with the above details, the institute has also released the details of the bifurcated offers. The table below depicts the number of offers made in different courses during IIIT Kancheepuram placements 2022:

IIIT Kancheepuram Placements 2022
Course	No. of Offers
BTech	175
Dual Degree	60
MTech	47

Among all the branches, Electronics and Communication Engineering (ECE) recorded the highest number of offers, i.e., 94. The second in the row was the CSE branch with 92 offers. Check the branch-wise number of offers from the table below:

IIIT Kancheepuram Placements 2022
Branch	No. of Offers
CSE	92
ECE	94
Mechanical Engineering	46
Mechanical Smart Manufacturing	50

Percentage of Offers: Branch-wise

ECE emerged as the top branch with the highest percentage of offers, i.e., 33.3%. This was closely followed by CSE. Check the snip given below that depicts the branch-wise percentage of offers made during IIITDM Kancheepuram placements 2022:

Batch Placed Trends

A year-on-year growth was recorded in the number of offers made over the past three years. It increased by almost 5% from 2020 to 2021 and then further rose by almost 52% from 2021 to 2022. See the below infographic for IIIT Kancheepuram placement trends:

The placement rate also indicates an incessant growth from 2020 to 2022. Check the below table for the IIIT Kancheepuram placement trends over the past three years: 

IIIT Kancheepuram Placement Trends
Particulars	2020	2021	2022
Placement rate	74%	88%	97%
Students registered	NA	273	286

Batch Placed Trends: Course-wise

The number of offers made to BTech, dual degree, and MTech students were the same for 2020 and 2021. However, in 2021 the number of offers increased for all the courses. Check the below infographic for detailed analysis:

Recruiting Companies 2022

Some of the leading companies that have been part of IIIT Kancheepuram placements in the past years are listed in the table below:

IIIT Kancheepuram Placements: Recruiters
Saint-Gobain	Microchip Technology	Amazon
Samsung	Adobe	Capgemini
Zoho Corporation	Virtusa	Google
Larsen & Toubro Infotech	Michelin	Trimble

Scholarship

The Indian Institute of Information Technology Design & Manufacturing Kancheepuram offers financial aid in the form of scholarships and education loans to students. Candidates must meet the eligibility conditions set by the college to avail the scholarships. The college awards scholarships based on academic merit and family income. More details regarding the Indian Institute of Information Technology Design & Manufacturing scholarship are given below.

Merit-cum-Means Scholarship

• Merit-cum-Means Scholarship of Rs 1,000 per month is awarded to 25% of eligible B.Tech students whose household income is less than Rs 4.5 lakh per annum. They are also exempted from paying tuition fees.

SC/ST Scholarship

• SC/ST students admitted to the B.Tech course and whose household income is less than Rs 4.5 lakh per annum are eligible for mess charge concessions and exempt from paying hostel seat rent. They are given a monthly pocket allowance of Rs 250. They are also exempted from paying tuition fees.
• Under top-tier education scholarship schemes, the Ministry of Social Justice and Empowerment has allocated ten new slots for SC students and ten new slots for ST students. 

Institute free Studentship

• Institute free Studentship (IFS) scholarships are awarded to 10% of eligible B.Tech students in IIITDM Kancheepuram with a household income of less than Rs 4.5 lakhs. They are also exempted from paying tuition fees.

Education Loans 

• All the leading banks offer pre-approved education loan facilities to students.

Sn.	Name	Rank Value	College Possition	Year	Field
1	NIRF(200)	200	184	2022	Engineering